home | shopping | contact | projects | login | join

Tachometer

Search Projects:   Share Thumbnails Slideshow Tutorial Tachometer Submitted By: kpreese Date Created: 12-17-2005 Description: To me, motorcycles should have a tachometer. Since the 2006 Dyna Street Bob is a new bike, there isn't a lot of info out there on the best way to proceed. I FINALLY found the mount I wanted after an exhaustive search and so here goes . . . Related Projects: H-D 2006 FXDBI Street Bob     Lighting updates (run/turn/brake controller, LED blinkers and tail light)     (Tachometer)     License Mount     Fat Mini-Apes     Horn Cover     Garage Door Opener     New Exhaust << Prev Displaying 28 - 36 of 42 Next >> Tap tach ground wire into the speedo ground Power wires finished Reinstall the dash panel Route the signal wire Remove electrical caddy cover Route the signal wire Pull the wire through the opening in the caddy Prepare ECM connector Open up the ECM connector cover << Prev Displaying 28 - 36 of 42 Next >>

All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.