|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Tachometer
|
 |
|
|
|
|
|
|
|
|
|
|
|
Open up the ECM connector cover
|
|
At the neck of the connector (where the wire bundles enter) you need to snip the zip tie that goes around the neck and wire bundle. In this picture, the zip tie was already snipped.
There are three locking tabs that hold the cover closed. Release all three of these using a small screwdriver to pry them if necessary.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
