|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
59 Glastron
|
 |
|
|
|
|
|
|
|
|
|
|
|
Don't try this at home.
|
|
There was a gap between the new transom and the inner sides of the hull so instead of trying to force thickened epoxy into the voids I hoisted the boat up so that the transom was horizontal. Then I pored slightly thickened resin into the gap. By adjusting the angle of the boat I was able to make a fair fillet.
I did have a little trouble with the backing plate for the bow eye. When the boat was just about vertical the rotten chunk of particle board snapped in half and fell away. Luckily the washer was large enough to prevent disaster.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
