|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
59 Glastron
|
 |
|
|
|
|
|
|
|
|
|
|
|
New transom
|
|
I've fabricated a new transom and stuck it in. I didn't take any pics of the process since my Canon PowerShot camera crapped out. I've since gotten it back from the repair center so I'll start keeping a better log of my progress.
Anyway, I made a template of cardboard then thin ply then used the plywood template to cut two bits out of 3/4" marine grade ply. These I glued together with Clark Craft GL-10 super glue (www.clarkcraft.com). The laminated joint is now stronger than the plywood itself.
Harbor Freight had 3" C Clamps on sale for $1.99 and deep jaw clamps for $7.99 so I stocked up. At the bottom of the transom where the clamps wouldn't reach I wedged 4 2x4s between the transom and the seat base. Hopefully I have a tight fit with no voids. I do like a tight fit.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
