|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
1971 GW Invader 13' Banchie
|
 |
|
|
|
|
|
|
|
|
|
|
|
(Insert New Caption)
|
|
|
January 27, 2008: Spent some time with the grinder today! First, I used the cutting wheel to trim the lip of the fiberglass at the grooves where the stringers and keel will be going in. Then, I swapped in a grinding wheel to fair out the existing glass about 6-inches either side of the stringers and keel so that the new glass will have something to bite when it gets epoxied in. I also rough cut an 8-foot chunk of 3/4 inch fir plywood for the keel. Lots of dust! Glad I did this outdoors - got to about 40-degrees today!
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
