|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
1971 GW Invader 13' Banchie
|
 |
|
|
|
|
|
|
|
|
|
|
|
(Insert New Caption)
|
|
|
January 1, 2008: Lots of epoxy (West System #105 resin and #206 slow hardener) with filler (#403 silica) with a layer of 4-oz. glass cloth between them and the second layer of the transom is firmly seated. Not too much pressure on the clamps, though, as you don't want to skooge it all out. I ran a thick fillet of peanut butter epoxy into the gaps at the edges. Second layer went in much easier than the first, as the first layer took all the sagging and warping out of the skin. Needed fewer clamps and screws to seat it as it was a flat surface mating to a flay surface. This thing is rock solid now!!
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
