|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Engine repower
|
 |
|
|
|
|
|
|
|
|
|
|
|
Submitted By:
|
kiwipete
|
|
Date Created:
|
06-29-2005
|
|
Description:
|
This is the plan:
I have an old Volvo Penta AQ200 / Chev 305 core in my shed that I am going to re-build up to Volvo AQ225D spec and repower my boat with it next winter.
(A V8 always sounds better than a 6 cyl. Right?)
I have been quite succesful in getting most of the trim bits I need to build this up.
So far I have found 5 Exh manifold sets, An intake assy with correct Q'jet carb and flash arrester, engine mount brackets, Damper for the flywheel, Raw water pump assy, Correct oil pan and matching dipstick / tube set.
TradeMe has taken a big hit on this while I gather up all the bits I need to make this look like a Factory Engine of the correct period.
I will photo doc this once the block comes back from the engine shop and the assembly process begins.
Read on.....
|
|
Related Projects:
|
SHANANA
(Engine repower)
Dinghy repaint
|
|
Tools / Materials:
|
Go to the Boating Store
|
|
|
<< Prev
|
Displaying 10 - 11 of 11
|
|
|
Nearly time for startup.
|
RH side
|
|
|
|
<< Prev
|
Displaying 10 - 11 of 11
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
