|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Engine repower
|
 |
|
|
|
|
|
|
|
|
|
|
|
RH side
|
|
You can see the oil pan clearly in this shot.
Big problems here as I was not able to get an oil pan with the dip stick on the RHS.
I had the piece cut out of the left and grafted into the right side.
Cast Aluminum pan - easy right?
The welding caused to sump to pull in from each end so it had to be cut down both sides and pulled back straight before rewelding.
It had been repaired previously as the damage appeared to be from a con-rod departure.
It is now all straight and true again so hopefully there will not be any leaks.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
