|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
LS1 Aluminum Drive Shaft
|
 |
|
|
|
|
|
|
|
|
|
|
|
Installing new Shaft
|
|
|
GM Service Information says to coat the yoke spline and bearing surface with chassis grease before installing. I smeared a very thin coat of grease on the parts, then the shaft slid right into the tail housing with no problem. The shaft and lobes are wider than the steel shaft, so its a little tighter, but still plenty of room to install.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
