|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
1998 Firebird Headlight Modification
|
 |
|
|
|
|
|
|
|
|
|
|
|
Run Wire through Firewall
|
|
The load line from the switch in the console was thread through the dash by drilling a 1/4" hole near the main wire loom from the fuse box.
The wire was wrapped in PVC electrical tape so it would fit tight in the hole and protect the wire from chaffing. This is the best I could do because there is no room to get my hands in there to install a rubber grommet. Then a length of split loom was added to make it look OEM and protect the wire.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
