|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Engine
|
 |
|
|
|
|
|
|
|
|
|
|
|
Side main body
|
|
|
This carb is not adjustable, but the metering jet can be removed for cleaning after a plug is removed (red arrow). The small passage must be cleaned with some cleaner, and should be blown out with compressed air. The carb also has a series of precision drilled holes (black arrow) that must be clean. There is a welsh plug covering this, and it must be removed for access. Clean them with a toothpick, never use wire because if these holes become enlarged, the carb will need to be replaced. The yellow arrow points to the primer bulb area. The bulb should also be removed for cleaning, and a new one installed.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
