|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Engine
|
 |
|
|
|
|
|
|
|
|
|
|
|
Main body
|
|
|
These carbs must be properly rebuilt, and that means CLEAN. The main jet (white arrow) comes out of the center bore (yellow arrow). There are 2 o-rings on it that must be replaced. ENSURE the lower ring is removed. It is easy to miss this, and if not removed, the engine will never run correctly. A hooked paper clip will get it out. Also, the needle seat must be removed, again, with a paper clip. Do not scratch the carb with the clip. The red arrow points to where a welsh plug is located. It has to be removed to get the carb clean. New welsh plugs come with the carb kit. A Q-tip works good to get the hard to reach areas clean. If the carb is very dirty, the body should be soaked in a carb cleaner overnight to get all the small passages clear.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
