|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Engine tear down, reassembly and tuning
|
 |
|
|
|
|
|
|
|
|
|
|
|
Remove the locating pins
|
|
|
These are tapered to exactly align the front half of the crankcase/block with the back half. They must be driven out from the small side, or you'll crack the block. A small punch and hammer works well for this. Next, remove the screws that hold the crankcase together. There are 6 total, 4 on the periphery and the two behind the reeds.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
