|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Tachometer
|
 |
|
|
|
|
|
|
|
|
|
|
|
Route the signal wire
|
|
I used an adhesive backed mounting pad to zip tie the signal wire in the lower part of the dash area. This makes it easier to keep that single wire running down the center of the tank.
HINDSIGHT: I probably had enough sheathing for that signal wire to slide it all the way back under the bundle sheath with the others. If possible, wait until you finish routing this wire to decide. The more protection, the better.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
