|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Tachometer
|
 |
|
|
|
|
|
|
|
|
|
|
|
Route the wires
|
|
A little out of order here, I should have shown where I have the wires routed up to now. I don't have a picture that shows it. The wires exit the bottom of the cup towards the front of the bike.
I routed these wires down through the wire chase in the top triple tree along with the wires from the hand controls. I then pulled the wires along the left side of the neck to the dash area. Make sure you leave plenty of slack so that you can turn the handle bars from lock to lock without stressing these wires.
(picture shows the clutch cable is between my wires and the neck. I actually did the opposite.)
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
