|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Tachometer
|
 |
|
|
|
|
|
|
|
|
|
|
|
Mount cup onto base
|
|
I hope this picture is clear enough, but you need to use the 1/4" allen bolt to mount the cup to the base. The polished aluminum part you see is the back of the top triple tree. The screw goes up through the bottom of the base and into the bottom of the cup. Blue Loctite.
HINDSIGHT: As I mentioned with that washer, I think I should put something thin in between the cup and the base. These slick pieces move like crazy when you attempt to tighten that bolt. It is tricky to keep the base AND the cup in alignment. I am wondering if a thin rubber "washer" might work here, another vibration damper as well perhaps?
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
