|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Lighting updates (run/turn/brake controller, LED blinkers and tail light)
|
 |
|
|
|
|
|
|
|
|
|
|
|
Splice in a second load balancer
|
|
The instructions indicated that if the turn signals flash normally 4 or 5 times and then flash rapidly, then another load balancer is required. After installing both rear turn signals, things still worked properly. However, after installing both front turn signals, I experienced the rapid flash issue.
Additional load balancers come with the front set and rear set of LED turn signals. But these load balancers lack a connector and a convenient connection location.
I unplugged the load balancer installed under the seat. Here you can see the 3 wires need to be spliced with the original load balancer. NOTE: there are 2 violet wires and one black. The violets are interchangable so just get the 3 wires spliced with the blacks together.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
