|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Rebuild Phase
|
 |
|
|
|
|
|
|
|
|
|
|
|
Painting - Another fun job!
|
|
Painting is one of those jobs. It sucks however it is the single biggest contributor to how good the boat will look when it's done.
As far as I know there are two options. Get it sprayed professionally or DIY with a roller & brush. After much deliberation I decided to have a crack at it myself. I've done the rest of the project with little or no practical experience so why change now??!!
First came the primer and I went for the International Interprotect two pack. Basically you mix it a 3-1 and roll it on. It's viscous and goes on quite thick. After 2 coats I sanded it back and then went another two coats before sanding it back again.
When sanding I used a random orbital and I found 400 grit was too fine to start with. I ended up using 220 grit to smooth it out and went over it again with 400 to finish it.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
