|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Rebuild Phase
|
 |
|
|
|
|
|
|
|
|
|
|
|
Glassing in side floor panels
|
|
As before I bogged around the edges, pre-cut my kit and ran 4 x layers of glass over the panels.
As with all my fiberglassing I ground away any gelcoat and cleaned all surfaces with Acetone to ensure a good bond. All timbers were primed with resin diluted 25% with Styrene to improve water resistance. All the floor panels have a layer of fiberglass on the underside meaning the are fully encapsulated.
I weigh 115kg and have jumped (hard) on the floor panels. The real test will be when Joe comes out on my boat!!!
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
