|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Destruction Phase
|
 |
|
|
|
|
|
|
|
|
|
|
|
Removed hardwood timber
|
|
|
As the top of the transom is thicker than the bottom, it was difficult verging on impossible to make the floor cuts as the grinder would not fit. To remedy this I decided to remove the think hardwood top of the transom first. To do this I first drove a chisel and crowbars to separate the hardwood from the ply backing. This was not too hard. I then cut the hardwood into sections which broke off with a bit of persuasion.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
