|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
1983 Lund Mr. Pike 18
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Next on the agenda is to build a compartment that covers the battery, gas tank, and power tilt pump motor. I plan to box this area in to create a compartment. The center will be fixed and I'll install a seat base there while either side will have doors that open to the top to allow access to the compartment. I'll separate the compartment into two sections, one for the electrical components and one for the fuel tank. Both sides will have vents as well. I'll replace the rest of the flooring and front deck as they were originally.
The steering console will be modified slightly so that I can move it forward a few inches. As it was delivered from the factory the top of the shifter / throttle nearly hits the dash. A few inches isn't much, but it will resolve the clearance problem and will require only very minor modifications. I'll re-use the aluminum frame for the console, but it will be updated with carpeted panels where stained plywood originally appeared. I'll likely change the design, but only slightly.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
