|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Transom repair
|
 |
|
|
|
|
|
|
|
|
|
|
|
(Insert New Caption)
|
|
|
Transom is in clamped and bolted,After debating I went with waxed polyester resin,at this stage it is one layer of mat cloth on the hull ,1/2" fir plywood,layer of mat cloth,1/2" fir plywood.The mat cloth attends on the sides and bottom of the hull approx 6" and 1/2 " over transom top.I used waxed paper so clamps wouldn't be stuck .I had to work really fast a better way would have been to put the layer of mat on the hull and then the first piece of plywood then bolt and clamp,let it cure ,sand and clean then do the next layer of mat and plywood ,clamp and bolt,alot easier if your not the best with fiberglassing ,less stress
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
