|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
76 Grady White I/O conversion
|
 |
|
|
|
|
|
|
|
|
|
76 Grady White I/O conversion
|
|
|
|
Submitted By:
|
recess
|
|
Date Created:
|
06-06-2007
|
|
Description:
|
I purchased a solid 1976 Grady White Gulfstream (walk-around) with the OMC stringer drive. My original intent was to find this style boat and set it up for offshore use. I did not want a large splash-well on the back of the boat for going off-shore, so the old I/O style met my needs. Over the last 3 years, I accumulated the parts (bracket, steering, motor, guages, etc.) and did the fiberglass work to seal up the old stern drive hole and prepare the transom for the bracket. The pics show the final stages, as I was not aware of this forum when I started, nor did I take pictures as the work progressed.
|
|
Tools / Materials:
|
Go to the Boating Store
|
|
|
|
1976 Grady White Gulfstream with the new power plant
|
Grady White I/O conversion to 175 Yamaha
|
Original OMC 4 cylinder
|
Old OMC 4 cyl gone.
|
All new steering, electrical, and fuel/oil lines
|
Dash board components
|
Dash Board
|
We're gettting closer!!!!)
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
