The instructions are adequate, but some pictures of an installation of a Screamin' Eagle Air Cleaner would probably be helpful for some folks, so here ya' go. I installed this on my 2003 Sportster. The kit fits quite a range of years though there were a handful of other parts and steps for installation on other years that I didn't need. While I had the air cleaner off, I also drilled out the tamper-resistant plug that covers the low-speed fuel adjustment screw on the carburetor. If I ever get around to actually adjusting that to improve the off-idle ultra lean sputtering I get until she warms up, I'll post it as another project.
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
