|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Rigid Raider 5.2m assault/landing craft
|
 |
|
|
|
|
|
|
|
|
|
Rigid Raider 5.2m assault/landing craft
|
|
|
|
Submitted By:
|
john the landlubber
|
|
Date Created:
|
02-12-2006
|
|
Description:
|
I have just purchased this hull as an unfinished project. It was built by a company called RTK Marine, a british company who have been supplying many specialist craft of this type to the british armed forces since 1972. The loa is 17ft 6" and beam is 7ft 3". The hull takes a long shaft motor. The usual motor would normally be 140hp (either johnson or suzuki) but, the larger 6.3 metre model will take twin 140's. This i'm told produces speeds of between 40&50 knts if travelling light. With the single 140 she should get to around 30knots. I am intending to rebuild this hull over time, but to start with am gonna concentrate on the outside of the hull. Unfortunately, past owners have done poorly finished repairs so the hull looks rubbish. i can understand this to some extent as any repairs to be done frome the inside would need the deck removing, the foam between the skins digging out and then re-doing. This is gonna be a lot of trouble. The foam gives the hull most of it's rigidity and strength. I believe it is injected in at point of manufacture whilst the hull is in a jig to prevent the pressure of the expanding foam bending the hull out of shape, and I obviously do not have a jig at my disposal.
|
|
Tools / Materials:
|
Go to the Boating Store
|
|
|
<< Prev
|
Displaying 19 - 27 of 29
|
Next >>
|
|
(Insert New Caption)
|
(Insert New Caption)
|
(Insert New Caption)
|
(Insert New Caption)
|
(Insert New Caption)
|
Starting to see light at the end of the tunnel.
|
Quickconnect t steering & Morse throttle control fitted, and battery in!!!
|
(Insert New Caption)
|
(Insert New Caption)
|
|
|
<< Prev
|
Displaying 19 - 27 of 29
|
Next >>
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
