|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Gulfstream
|
 |
|
|
|
|
|
|
|
|
|
|
|
6/23/05
|
|
I prefoamed the center pipe to make sure that it stays put once I foam under the tank. I also wanted to be sure that I could pull the center pipe out before the tank was installed. It worked as planned.
Notice also, the vertical tubing that has been inserted into holes at the outboard end of the laterals. The vertical tubes have been greased and taped to the floor. They will be pulled out after the tank has been foamed in. No matter how high the foam rises on the sides of the tank, there will be holes thru the foam to allow any water that gets into the bay, out into the bilge.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
