|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Gulfstream
|
 |
|
|
|
|
|
|
|
|
|
|
|
6/11/05
|
|
The first of three floor sections to get glassed. As was the final coat in the bilge, all the flooring will be done with 10 oz woven mat. Only this rear section will be pigmented white. Once I apply the final coat of epoxy on the section, the entire rear end of the boat will be spray painted white with Interlux Brightsides. You can see how pigmented epoxy yellows by comparing the bilge with the flooring. I did the bilge back in November.
You may notice that there is no 'disappearing rope' in the gas tank bay. As I had laid the rope last Novenmber, it shrunk due to all the moisture in the air. I will reapply it before I set the tank in.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
