|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Gulfstream
|
 |
|
|
|
|
|
|
|
|
|
|
|
(Insert New Caption)
|
|
As mentioned before, screwing seat bases to 1/2" plywood is a formula for trouble. I have letted 2 x 8's into the outer stringers, chamfered the outer ends of the 2 x's and used epoxy peanut butter to affix them to the inner hull. Now when I reinstall the seat bases the screws will have something to bite into and there will be no holes thru to the foam. I'll also use larger diameter stainless lags to hold them down and flood the predrilled holes with CPES.
Also note the installed strips beneath the edges of the original flooring edges. These have been appropriately treated and will give me a surface to set the new flooring onto.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
