|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Permanent Fuel Tank
|
 |
|
|
|
|
|
|
|
|
|
|
|
Additional Hardware
|
|
|
Additional hardware for project include this stainless steel fill, 3-way valve, vent, brass hose barbs, and primer bulb. Also have stainless steel hose clamps and other misc bits and pieces. The 3 way valve is designed so that if inputs are on left and right, output is on top. A fuel line connector will be one of the two inputs to the valve so a portable tank can be brought and easily connected if I want extended crusing capacity. Plan is to mount the 3-way on the inside of port gunnel just in front of the splashwell. The output hose barb gets too close to the inside top of the gunnel, so a 90* elbow will be added between the valve and hose barb to prevent possable tears or kinking of the fuel line.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
