|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Cruise Craft Rapide V15 Restoration
|
 |
|
|
|
|
|
|
|
|
|
|
|
Gauge test
|
|
|
Finally got my gauge holes cut. 54mm holes for the smaller gauges, no problems as I has a hole saw for the job. The 2 bigger gauges needed 86mm holes. I only had a 76mm or 90mm. I had to use the 74mm. The routing to extend the diameter of the hole was done with a flap bit. Just take your time. Go slow and work in circles, apply even pressure to all sides of the circle. Check if the gauge fits evey 1 or 2 revolutions, so that you don't route it out too far. If you don't know what I mean, let me know and I'll explain it too you. Anyway, I'm happy with the result and on a WHITE GLOSSY 2pac paint these gauges will look superb.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
