|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Mechanical
|
 |
|
|
|
|
|
|
|
|
|
|
|
Carb rebuild
|
|
|
I took the carb apart and found a lot of hard deposits. Some passages were completely blocked. After a good cleaning, the passages were blown out with compressed air to ensure they flowed. The float was adjusted, and it was put together with new parts from a kit. It is VERY important that it goes back together completely. The kit came with a diagram that showed an exploded drawing of it, but it seemed to be missing a check ball and spring that were on the carb when it came apart. I looked in the Mercruiser shop manual and it showed these. The kit did come with them, so it was weird that it was not shown. The kits will work with a few different variations of this carb, so ensure you have the proper book for yours.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
