|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Interior
|
 |
|
|
|
|
|
|
|
|
|
|
|
New firewall tht fits
|
|
|
Another new firewall was cut after measuring the boat. 2 pieces of 2X2 were screwed to the firewall so it can be screwed to the deck and support the seat. Since the firewall sits at an angle in the boat, these pieces were cut for the proper angle when the firewall is in the boat. The hole on the bottom will allow access to the front engine mount. This actually was required when I aligned the engine earlier this year when I replaced the lower drive bellows.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
