|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Deck and stringer repairs
|
 |
|
|
|
|
|
|
|
|
|
|
|
A little paint
|
|
|
After some time cleaning up the old glue on the gunwales (after removing the old carpet), removing the remaining "goo" on the side deck and sanding the new decking, I painted it all with Rustolleum oil based paint. This step is not really needed, but I went ahead anyhow to help seal it up a little more. It will all be covered up with carpet so it will never be seen. The small blocks on the bulkhead are temporary supports for the fuel tank access panel. After the tank goes back in the real frame will be added. A note about the gunwales: At the factory, the sides were sprayed with foam, and a thin layer of glass was installed over this.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
