|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Deck and stringer repairs
|
 |
|
|
|
|
|
|
|
|
|
|
|
Stringer channels trimmed
|
|
|
New stringers were cut and fitted. The old channels are being trimmed to bed them down. Normally, they would be totally cut out at the bottom, but I am leaving most of it there because it is in good shape, and will only reinforce the new glass "caps" that will cover the new wood, forming the solid stringers. If I was to do this again, I would remove the foam first then cut the stringers about 1" from the hull. It would have been much faster. Live and learn.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
