|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Lepera Bare Bones on 2003 Sportster
|
 |
|
|
|
|
|
|
|
|
|
|
|
Sissy bar removal, rear strut bolt
|
|
|
The rear strut bolt was a little tougher. No nut on the backside, but there isn't enough room to get a ratchet in there due to the rear blinker. I am using OTC torx bits. They are a 2 piece design. You can use a wrench on the flats of the bit itself (shudder . . . 8mm, actually perhaps it was a 5/16" but the 8mm worked), but leaving the bit inside the socket adapter makes this easier. By applying pressure with the thumb, it is a little easier to keep the wrench on the flats of the bit.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
