|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
platform seating area
|
 |
|
|
|
|
|
|
|
|
|
|
|
I cut and installed the bases in the front of the boat
|
|
As you can barely see the new bases are set in place and epoxy gel was added to almost all edges where they meet the boat. I had a hard time getting it all but as it is dry now I can freely move in and finish this up. I am a little wider than 16 and 1/4".
The board near the top rear is a temporry brace to be sure it is straight and the correct distance apart.
As you can see the plywood is not sealed yet. I will seal it up prior to installing the foam that is needed.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
