|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Transom / Stringers / Floor
|
 |
|
|
|
|
|
|
|
|
|
|
|
Splash Well Rebuild
|
|
(07-2007) I attempted to put the cap back on and found that the transom was a little too thick. I tried to grind it down a touch but went through a few times so decided to cut the back off and just glass it in. (Wow...a year ago I would NEVER have said that!).
Here is a picture of the transom/splash well. I put a brass drain tube in and used the flange tool again. A few more coats of resin and lots of sanding...it will be ready for gel coat.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
