|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Transom / Stringers / Floor
|
 |
|
|
|
|
|
|
|
|
|
|
|
Re-do
|
|
(10-10-2006) Well, if at first you don't succeed... Seems that I didn't use enough resin and/or I clamped it too tight. One half started separating when I removed the clamps. I was able to pull it apart and I found dry mat. I applied resin and mat to the side that the original mat didn't stick to. I then applied resin to the side with the original mat still stuck to it and clamped it back together. I used as much resin this time as I had for the entire transom on the first attempt.
This time, after removing clamps...it held.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
