|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Kellercraft rebuild
|
 |
|
|
|
|
|
|
|
|
|
|
|
V keel layup
|
|
In this pic I have laid up around the anchor well with alternating layers of chop strand and triaxial mat, two of each. The inside where the anchor and rope will sit has been completely laid up with biaxial and chop strand.
Below the well the hull has been heavily reinforced with overlapping layers of triaxial mat and chop-strand, I learned the hard way here that despite my good intentions of doing it in multiple single pieces of glass, it was just too hard to get a quality result becuase of the hull deadrise so I ended up doing it in strips which was much easier to handle, the couple of inches of overlap each strip had with the next made for a very strong end result so I am happy it ended this way.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
