|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Kellercraft rebuild
|
 |
|
|
|
|
|
|
|
|
|
|
|
Hope my level is level!
|
|
Now it's time to raise the stringers and add a couple, the hull and original stringers have been completely laid up with vinyl - ester as the resin and triaxial and chop-strand as the glass, for the second time, so 4 layers in total over the stringers so far.
The wood used to raise and make a stringer is 1st grade Hoop pine and 25mm thick, they were all glued down using Iso polyester resin, carbosil and many many thousands of small 4mm long glass fibers all mixed into a slimy paste.
The new wood was then planed and sanded to be level front to back and side to side but still low enough that the planned future glass over bare wood layup would bring them up to the correct height for the flooring.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
