|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
'65 MFG Niagara
|
 |
|
|
|
|
|
|
|
|
|
|
|
Spring Comes
|
|
Spring came and I found out that the trailer was badly bent and in need of a lot of work. The tires were rotted, coupling was bent, the jack had been hack sawed off, the winch was rusted and needed a new cable. So I bought a new 1200lbs GVW galvanized trailer with 12" rims for $450. Sold the old trailer for $100.
Picture shows how the boat was pulled off the old trailer onto the new trailer. The winch post was removed from the old trailer, then the new trailer backed up over it. The winch from the new trailer was connected to the eye bolt and winched the boat onto the new trailer. The 2x4 was used to help nudge the boat up onto the first keel roller. After that it was just cranking.
The saw horse in the boat was made from 1x4 and supported the tarp like a tent so snow and rain would not puddle on the cover during storage.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
