|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Folding Rear Seating
|
 |
|
|
|
|
|
|
|
|
|
|
|
How the leg is assembled
|
|
Here are all of the parts that go into the front leg laying as they would go together.
From top left again, the broom clip (No Longer Used, Failed), the copper pipe cap, the 1 inch length of copper pipe the street elbow, with the conduit strap setting over it. And finally the 1/2 inch conduit.
Actually the name 1/2 conduit is quite an oxymoron. This stuff measures 5/8 inch on the inside and just under 3/4 inch, actually .700 inches, on the outside.
Where they get the 1/2 from I don't know. But, that makes about as much sense as the 1/2 copper street elbows that are 5/8 on their OD, such that they will fit into the conduit.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
