|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Folding Rear Seating
|
 |
|
|
|
|
|
|
|
|
|
|
|
Descrition of all of the parts
|
|
Starting in the top left and going down and counter clockwise.
1. Broom clip used to apply tension to the front seat leg to hold it in position. (Failed - No Longer Used)
2. qty 2 - 1/2 inch copper tubing caps. Used to close off the end of the front leg
3. qty 2 - 1/2 by 1 inch long pieces of rigid copper pipe to connect the caps to the street elbows.
4. qty 2 - 1/2 'street' elbows, installed in the ends of the conduit and form part of the 'hinge' for the front leg.
5. qty 2 - 3/4 inch plastic conduit clamps, these hold the copper elbows to the seat bottom and are the other half of the hinge
6. Qty 2 - 1/4 inch shelf support brackets, these are the rear seat supports and pivots. (Failed - No Longer Used)
7. Qty 1 pair - 2 inch wide 'narrow' brass hinges, these attach the seat back to the seat bottom
8. Qty 1 - 1/2 emt conduit bent in a 'U' shape that is 15 inch from outside to outside and the legs are 10 inches from the floor to their tops.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
