|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Folding Rear Seating
|
 |
|
|
|
|
|
|
|
|
|
|
|
Back routed out for fiberglass
|
|
This 17 inch wide by 21 inch high piece of 1/2 plywood is the back support for the entire seat assembly. We are attaching the top of this behind the existing fiberglass at the rear of the drivers seat. To get the front of this ply flush with the fiberglass we removed 1/8 inch of wood from the ply. We will add a block onto the back of this so we can screw through the fiberglass and into the block to attach this to the boat.
The bottom edge of this is attached to a block that is screwed to the floor.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
