|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
1985 23 foot Sea Ray Cuddy Cru
|
 |
|
|
|
|
|
|
|
|
|
|
|
Starting to pour foam
|
|
Here I am starting to pour foam, I used 2 part 2lb foam in these areas.
I use a paint mixer the kind that goes in a drill to mix the foam. The area you can see is approx. 3 1/2 x 1 1/2x 1 1/2 of area. I used about 1/2 gallon each of part a and part b to fill this spot. I will be filling the rest of it after the lid is on because I want it to expand and bond with the lid. I will need to bore holes in the lid to do so, and will be using a 2" hole saw for this purpose, so I have a plug already made to put in the hole as the foam expands. Also I mixed the foam right ion the boat due to the fact I had only 30 seconds or so before it started to expand. Note the 2x2 thats not been treated to resin yet. Sticks out like a sore thumb.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
