|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Convertible top replacement
|
 |
|
|
|
|
|
|
|
|
|
|
|
Bow check
|
|
|
After the rear is glued in place, the front of the top is glued to the header. Again, proper fitting is a must. The front header needs to be flipped up to install the fabric. It must be placed properly because because when the top is up (frame fully extended), the fabric becomes taunt. The fit will be proper if the bow flaps are centered with the front bow when the header is up. After the glue sets and you lower the header, you will see the fabric stretch, but the bow flaps will still be centered with the bows. If you see this, pat yourself on the back.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
