|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
OutBoard Steering
|
 |
|
|
|
|
|
|
|
|
|
|
|
Steering Ram end
|
|
The way we attached the steering rod that we bent from 3/8 inch plated steel, from HomeDepot, is a little complicated. We are using an older Mercury ride guide steering system that came as best we can tell off of a pontoon boat. The original tube mount has been scrapped in favor of the plywood blocks. The end of the steering ram has some couplers and a 5/8 inch ID loop on it. Since we am using a 3/8 inch rod to make the steering rod, we used a brass bushing that is 5/8 od and 3/8 id in the loop at the end of the ram. That way the steering rod fits securely in the end of the ram. Two locking nuts keep the rod secure in the ram.
What I was patterning this after is seen in the next photo...
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
