|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
14 Ft 'Ski-Boy' Restore - Tiny-Tannic
|
 |
|
|
|
|
|
|
|
|
|
|
|
When last we left our heroin,
|
|
Just to back track and update some of the project information. We will get some shots of the floor, once we clear all of the mess out of the boat from vacation. One thing we could get to was the ski pylon mount, here is the finished base for the pylon. and yes, that is a 1 inch galvanized pipe flange with a short section of pipe in it. Again, we bought the pylon used, without mounting hardware, so we had to make our own mounts. That flange is bolted to a 1 inch by 6 inch piece of OLD treated southern yellow pine with 4 - 1/4 inch stainless bolts, fender washers and lock nuts.
The board is bolted to the 2 inch angle braces we installed with 4 - 1/4 inch stainless bolts and the angle is bolted the stringers and transom braces.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
