|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
14 Ft 'Ski-Boy' Restore - Tiny-Tannic
|
 |
|
|
|
|
|
|
|
|
|
|
|
Last section of Floor installed
|
|
We again made a pattern for these floor sections out of cardboard and also measured them out before we cut them. They are supported on three sides: The front, where it meets the existing floor, is on blocking that is screwed to the bottom of the existing floor. The inboard side is setting on the stringer. The rear is setting on those floor support blocks we added to the transon.
The outboard edge gets filled and glass taped to the hull. The other side is exactly the same. We did leave the center section between our transom braces open for now. We may add a cover at a latter date.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
