|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
14 Ft 'Ski-Boy' Restore - Tiny-Tannic
|
 |
|
|
|
|
|
|
|
|
|
|
|
Flooring Support Blocks
|
|
To support the rear edge of the floor at the transom we cut these blocks out of some old CCA type pressure treat that we had laying around. Since this is CCA treated we don't have to worry about it corroding fasteners like the new AC2 stuff does.
We choose this material because its made from Southern Yellow Pine and is very strong. So it will handle a number of screws in it and it also helps to seal the transom edge to the hull.
We have reference lines on the transom of where the blocks go and where the floor will sit on top of them so we put these in the right place.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
